1. Set temperature :105.0 ~ 150.0℃  

2. Humidity range :75%RH to 100%RH  

3. Temperature rise time: ≤100 minutes (from room temperature to 120° and humidity to 85%RH time)  

4 temperature stability time: test box touch screen display temperature stability (≤±2℃), 5 minutes inside the box temperature and the target temperature deviation ≤±2℃, 10 minutes inside the box temperature stability ≤±2℃ (no load)  

5. Pressure: maximum pressure 2kg/cm²  

6 pressure working range: 0.02 ~ 0.19mpa/relative pressure  

7. Time range: 0 Hr to 999 Hr  

8. Pressure time: 0.00 Kg ~ 1.04 Kg/cm² about 45 minutes  

9 temperature deviation: ≤±1.5℃ (no load)  

10 temperature uniformity: ≤±1.5℃ (without load)  

11. Humidity deviation: when humidity ≥75%RH, humidity deviation ≤±3%RH;  

When humidity < 75%RH, humidity deviation ≤±5%RH;  

12. Test mode: HUM(unsaturated :75%-100% humidity) test mode /STD(saturated :100% humidity) test mode  

13 pressure fluctuation uniformity: ± 0.1kg  

14 humidity distribution average: ± 3%RH  

15. Layer frame: each box is equipped with test steel mesh (lamellae), steel mesh size: ≥W240×D400mm, load: ≥10KG, steel mesh number: ≥1  

16. Noise: 1M away from the device ≤7  

Material of test chamber:  

1 test box size :φ316×D530mm (diameter × depth)  

2. Capacity: 40L x 2 containers  

3. Full machine size: ≤1000×1500×1850mm (width × depth × height)  

4. Inner barrel material: stainless steel plate (SUS# 316 3mm)  

5. The material of the outer barrel: stainless steel plate or electrolytic plate, anti-static plastic-sprayed insulation material: rock wool and rigid polyurethane foam heat preservation steam room  

6 heating tube: titanium tube heating, not easy to rust.